Article provided by: Pro Service Mechanical
Your water heater is an appliance in your home that you'll probably never think about as long as it is working properly. However, the wise ones will see the calamity before it happens. Just like any other piece of equipment or appliance, your water heater needs to be maintained annually if you want to avoid calamity. Indeed, proactive, ongoing maintenance is the best way to protect your water heater in Saskatoon. Pro Service Plumbing can help you keep your water heater from breaking down, malfunctioning, or needing to be replaced prematurely with proactive maintenance.
Different Kinds of Water Heaters in Saskatoon
Nowadays, there are two types of water heaters in Saskatoon homes. The first and most common water heater is the tank water heater. The tank water heater has a large holding tank where the water gets heated before it gets circulated throughout the home. The newest version is the tankless water heater. This is more of an instant-on type of water heater that is still not very common in homes in Saskatoon. Pro Service Plumbing is trained and experienced in servicing both types of water heaters.
In Saskatoon, most homes still have tank water heaters. Tank water heaters come in all shapes and sizes. One is powered by gas, and the other is powered by electricity. There are differences between the two types of water heaters, but from a homeowner's perspective, what is important is not the differences; it's knowing how to maintain them and what to look out for because a well-maintained water heater can last for decades!
Understand Your Water Heater
One of the best things that a homeowner in Saskatoon can do to protect their water heater is to understand a few key components of it, the most simple component being the shut-off valve. In the event of an emergency, such as a leak, the first thing you would want to do is to shut off the water coming into the heater. You can do that using the shut-off valve. Your water heater will have multiple pipes coming out of the top. At a minimum, the heater will have an inlet valve that brings cold water into the tank and a hot water pipe that takes the hot water out. You want to find the shut-off valve that is on the inlet line. Touch the pipe to see if it feels cold to find out which one it is.
The next component to be aware of on the water heater is the pressure release valve. That's the sits on the top side of the tank and has a pipe that runs down along the side. The pressure relief valve essentially protects your water heater from blowing up from too much pressure. If the burners run too long or something else malfunctions, allowing pressure to build up in the tank, this valve allows air to escape out to relieve that pressure. You want to look for signs of water on the floor coming out of this pipe.
Of course, these are just two of the many important components. You can always call Pro Service Plumbing if you don't know what to do.Water Heater Saskatoon
View Larger Map